Passive fire protection uses fire-resistant materials and construction methods to compartmentalise a building in Sydney, keeping fire and smoke isolated at their source so they don’t spread through the structure. By slowing the movement of flames and smoke, passive measures protect escape routes and give occupants vital time to evacuate safely.
Combined with fire alarm systems, passive measures help buildings respond earlier and evacuate more safely.
VQS Fire is trusted across Sydney for clear communication, clean workmanship, and detailed documentation that makes audits easier. Have a look at what Sydney building owners say about our services.
Passive fire protection starts with the barriers that divide your building into fire compartments. We install fire-rated walls, floors, ceilings, doors and openings that hold back flames, heat and smoke for their required Fire Resistance Level (FRL). This gives occupants time to evacuate and protects the rest of the structure.
We install tested fire-rated wall and ceiling systems to meet NCC and BCA requirements, including 60/60/60, 90/90/90 and 120/120/120 FRL assemblies. Our work covers boundary and party walls, fire-rated partitions, bulkheads, shafts and ceiling systems for residential, commercial and industrial buildings, with every system installed to its tested specification.
Fire-rated doors allow everyday movement while keeping the compartment boundary intact. We supply, install and maintain certified fire door assemblies in line with AS 1905.1. That covers the door leaf, frame, hardware, closers and smoke seals, so each door performs as tested when it matters.
Large openings and building services need protection too. We install fire and smoke curtains, fire shutters, fire dampers, fire-rated glazing and fire-rated louvres. These keep loading docks, atriums, ductwork and glazed areas from becoming weak points in the compartment.
Every pipe, cable, duct and joint that passes through a fire-rated barrier creates a gap that fire and smoke can travel through. Our fire stopping and structural fire protection services seal those gaps and protect the steel framework that holds your building up. We use tested systems matched to each service and substrate.
Where services pass through walls and floors, penetration sealing restores the integrity of the barrier. We install fire collars (including retrofit collars), wraps, sealants, fire-rated batts and pass-through systems tested to AS 4072.1. We also record each penetration so your building has a clear, up-to-date compliance register.
Gaps at movement joints, wall cavities and building edges can let fire bypass a compartment entirely. We install fire-rated joint seals, cavity barriers, and curtain wall and spandrel perimeter firestopping. These keep the protection continuous from floor to façade.
Structural steel loses strength quickly in a fire. We protect beams, columns and other steelwork with vermiculite fire spraying, intumescent paint and coatings, and fire-rated board encasement. The result helps your structure reach its required FRL and stay standing for longer.
Our ISO-aligned passive fire systems support consistent quality and safer delivery across every project. ISO frameworks help ensure jobs are planned properly, risks are managed, and workmanship is delivered to a repeatable standard.
Our alignment with Fire Protection Association Australia keeps our team connected to current industry guidance and best practice. It reinforces our commitment to delivering passive fire protection works that meet expectations across all sites.
We stay aligned with legislative requirements, construction best practice and evolving compliance expectations with helps ensure smoother coordination on-site, clearer communication, and better outcomes for builders, project teams and building owners.
CCF membership reflects disciplines governance for complex sites and live environments. It strengthens our approach to safety, risk management and projects control so clients can trust delivery that’s structured compliant and disruption-aware.
Passive fire protection in Sydney only works when it’s delivered with consistency, quality control, and reliability. VQS Fire has supported service delivery through recognised frameworks and industry alignment, giving our Sydney clients peace of mind that our work is built around best practice and compliant outcomes.
Our team install, inspect, test, and maintain all passive fire protection elements to the highest standards for Sydney buildings. We supply certified fire doors, fire-rated partitions, and penetration sealing systems matched to your building’s needs. Every installation is completed to the relevant Australian Standards and properly documented for compliance.
With a highly experienced team in Sydney, we carry out thorough inspections and routine maintenance in accordance with AS 1851 to keep your passive fire barriers compliant. From initial assessment to final sign-off, we provide peace of mind that your building’s passive fire systems are robust, reliable, and ready when needed, alongside fire equipment installation that supports first-attack response. On sites with first-attack equipment, ongoing fire extinguisher testing and fire blanket testing also helps keep that response layer compliant and ready when needed.
1
We review engineer drawings and walk the site to identify compartments, penetrations, and any existing defects or risks. You’ll get a clear scope and a plan that suits your building type and compliance needs.
2
We install ISO-certified passive fire systems using tested products matched to each substrate and service type. All work is completed to the relevant Australian Standards.
3
Every installation is documented so you’re not left chasing paperwork. We provide clear records to support compliance, handover, and future inspections, so audits are smoother and nothing gets missed.
4
Passive fire systems must remain effective over time. We conduct routine inspections and maintenance in accordance with AS 1851, address defects promptly, and help keep your passive fire protection compliant long after install.
From high-rise towers in the CBD to schools and strata complexes on the Northern Beaches, our passive fire technicians work across every corner of Sydney, plus the Central Coast and Illawarra. Find your area below, or give us a call if your suburb isn't listed.
NSW
NSW
NSW
NSW
If you own a building in Sydney and need passive fire protection, then contact us today to discuss compliant, building-specific solutions that keep fire and smoke contained to protect your people, property, and escape routes when it matters most.
Phone: 1800 556 359
Your enquiry has been received by the VQS Fire team!
A member of our team will be in touch shortly to discuss your requirements and assist with the next steps.
For urgent matters, please call us directly!
